Recording/Playback
Recording
START/STOP D
POWER switch C
START/STOP A
[STBY] t [REC]
(HOME) B | PHOTO |
E | |
EASY F |
|
Flashing t Lights up
1 Slide the POWER switch C until the respective lamp lights up.Press the green button only when the POWER switch C is in the OFF (CHG) position.
• (Movie): To record movies
• (Still): To record still images
To stop recording, press START/STOP A (or D) again.
•You cannot record movies on a “Memory Stick Duo.”
•See “Handycam Handbook” (PDF) for changing the image quality to SD (standard definition) image quality.
Press PHOTO E lightly to adjust the focus A (a beep sounds), then press it fully B (a shutter click sounds).
appears beside /. When disappears, the image has been recorded.
•Still images are recorded on the hard disk in the default setting.
bNotes
•If the ACCESS lamp is lit or flashing after recording is finished, it means data is still being written onto the hard disk or “Memory Stick Duo.” Do not apply shock or vibration to your camcorder, and do not remove the battery or AC Adaptor.
13