Sony 3-288-523-13(1), HDR-TG1E, HDR-TG3E Step 1: Charging the battery pack, bNotes, Getting Started, Started Getting, 4 Insert the battery, 3 Make sure that the LCD panel is closed

Getting Started

Step 1: Charging the battery pack

POWER button

QUICK ON lamp

/CHG lamp
		Battery pack
		Power cord
		(Mains lead)
DC IN jack
DC plug	AC Adaptor	To the wall outlet
		(wall socket)

Started Getting

You can charge the “InfoLITHIUM” battery pack NP-FH50 after attaching it to your camcorder.

bNotes

•You cannot attach any “InfoLITHIUM” battery pack other than NP-FH50 to your camcorder.

4 Insert the battery.

1Open the battery/Memory Stick Duo cover.

2Insert the battery pack all the way in until it clicks.

3Close the battery/Memory Stick Duo cover.

1 Connect the AC Adaptor to the DC IN jack on the Handycam Station.

Be sure that the v mark on the DC plug is facing up.

2 Connect the power cord (mains lead) to the AC Adaptor and the wall outlet (wall socket).

3 Make sure that the LCD panel is closed.

5 Place the camcorder on the Handycam Station as shown above, and insert it into the Handycam Station securely, all the way to the bottom.

The /CHG (charge) lamp lights up and charging starts. The /CHG (charge) lamp turns off when the battery pack is fully charged. Remove the camcorder from the Handycam Station.

7