[TIMING]

Select the recording start point after START/STOP is pressed. The default setting is [3sec AFTER].

[3sec AFTER]

[3sec BEFORE]

Notes

You cannot record sound with [SMTH SLW REC].

Image quality of [SMTH SLW REC] is not as good as that of normal recording.

Switching the screen display, or turning the LCD backlight on/off

Each time you press DISP, the screen indicators, such as remaining battery power, etc., turn on or off.

To turn off the LCD backlight, press and hold DISP down for a few seconds until appears. This setting is practical when you use your camcorder in bright conditions or you want to save battery power. The recorded image will not be affected by the setting. To turn on the LCD backlight, press and hold DISP down for a few seconds untildisappears.

Acquiring location information (GPS) (HDR-XR200V)

Set the GPS switch to ON ( appears on the LCD screen). Your camcorder starts trying to triangulate. When your camcorder triangulates successfully, it will record the location information at the time movies and photos were recorded.

The movies and photos with location information will appear on a map (p. 43), so that you

Contents of Table

Techniques Recording Useful

Index

38