When placing surround speakers behind you

(wide room)

 

B

Sub woofer

 

 

A

 

A

 

45°

 

C

 

C

 

 

90°

20°

Note

Do not place the center speaker further away from the listening position than the front speakers.

Normal Speaker and Micro Satellite Speaker

For HT-6600DP, the speaker size and the sub woofer selection has been preset to “MICRO SP.” (Micro Satellite Speaker) according to the supplied speaker system.

When you select “MICRO SP.”, the speaker size and sub woofer selection has been configurated as follows:

Speaker

Settings

FRONT

SMALL

 

 

CENTER

SMALL

 

 

SURROUND

SMALL

 

 

SUB WOOFER

YES

 

 

You cannot change the configuration if you select “MICRO SP.”.

If you change the speaker system, select “NORM. SP.”. You can adjust the speaker size and sub woofer selection when you select “NORM. SP.” (page 19).

To select “NORM. SP.”, turn off the power, then turn on again while pressing MAIN MENU. (To reset to “MICRO SP.”, do the same procedure.)

Tip

The setting for Micro Satellite Speaker (MICRO SP.) has been programmed to optimize the sound balance. If you use Sony’s Micro Satellite Speakers, select “MICRO SP.”.

Caution

When you use Micro Satellite Speakers and the speaker size is set to “LARGE”, you may not obtain the correct soundstage. The speaker may also be damaged at high volume position.

Specifying the speaker parameters

1 Press MAIN MENU repeatedly to select “SET UP”.

2 Press or to select the parameter you want to adjust.

3 Turn the jog dial to select the setting you want.

The setting is entered automatically.

4 Repeat steps 2 and 3 until you have set all of the parameters that follow.

Initial settings

Parameter

Initial setting

L

R

DIST. XX ft.

10 ft.

C

DIST. XX ft.

10 ft.

SL

SR

DIST. XX ft.

10 ft.

SL

SR

PL. XXXX

LOW

continued

Up Hooking

Setting and the Up System Speaker

17US