Name

Function

wh Numeric

Press ALT (G) and then press

 

buttons

the numeric buttons to

 

 

– preset/tune to preset

 

 

stations.

 

 

– select track numbers of the

 

 

CD player, VCD player, LD

 

 

player, DVD player, MD

 

 

deck, DAT deck, or tape

 

 

deck. Press 0/10 to select

 

 

track number 10.

 

 

– select channel numbers of

 

 

the TV, VCR, satellite tuner,

 

 

Blu-ray disc recorder, hard

 

 

disc recorder, or PSX.

 

 

 

>10/11

Press ALT (G) and then press

 

 

>10/11 to select track

 

 

numbers over 10 of the CD

 

 

player, VCD player, LD

 

 

player, MD deck, tape deck,

 

 

TV, VCR, Blu-ray disc

 

 

recorder, hard disc recorder,

 

 

PSX, or satellite tuner.

wj Input buttons Press one of the buttons to select the component you want to use. When you press any of the input buttons, the receiver turns on. The buttons are factory assigned to control Sony components as follows. You can program the remote to control non-Sony components following the steps in “Programming the remote” on page 69.

 

Button

Assigned Sony

 

 

component

 

 

 

 

VIDEO1

VCR (VTR mode 3)

 

 

 

 

VIDEO2

VCR (VTR mode 1)

 

 

 

 

VIDEO3

VCR (VTR mode 2)

 

 

 

 

DVD

DVD player

 

 

 

 

MD/TAPE

MD deck

 

 

 

 

SA-CD/CD

Super Audio CD/CD

 

 

player

 

 

 

 

TUNER

Built-in tuner

 

 

 

 

AUX

Not assigned

 

 

 

 

 

 

Name

Function

wk TV ?/1

Press to turn the TV on or off.

 

 

wl RM SET UP

Press to set up the remote.

a)The MASTER VOL +, TV VOL +, TV CH + and H buttons have tactile dots. Use the tactile dots as references when operating the receiver.

Notes

•Some functions explained in this section may not work depending on the model.

•The above explanation is intended to serve as an example only. Therefore, depending on the component, the above operation may not be possible or may operate differently than described.

•The 12 button on the remote is not available for receiver operation.

Started Getting

13US