20US
By connecting Sony components that are
compatible with “BRAVIA” Sync via an HDMI
cable (not supplied), operation is simplified as
below:
• One-Touch Play (page21)
• System Audio Control (page 22)
• System Power Off (page23)
“BRAVIA” Sync is compatible with Sony TVs,
Blu-Ray Disc/DVD players, AV amplifiers, etc.,
with the Control for HDMI function.
CONTROL FOR HDMI is a mutual control
function standard used by CEC (Consumer
Electronics Control) for HDMI (High-De finition
Multimedia Interface).

The Control for HDMI function will

not operate correctly in the

following cases:

• When you connect the system to components
which do not correspond with the Control for
HDMI function.
• When you connect the system and components
using other than an HDMI connection.
• When you connect non-Sony components
which are compatible with the Control for
HDMI function.
We recommend that you connect products
featuring “BRAVIA” Sync to this system.
•Depending o n the connected componen ts, the Control
for HDMI function may not work. Refer to the
operating instructions of the components.
To use “BRAVIA” Sync, set the Control for
HDMI function to on for the connected
components.
When you connect a Sony TV with the Control
for HDMI function, the Control for HDMI
function for the system and the connected
components can be set simultaneously by setting
the Control for HDMI function of the TV.
1Make sure that the system is connected
to the TV and the connected
components via HDMI cables (not
supplied).
2Turn on the system, the TV and the
connected components.
3Select the input of the system and the
HDMI input of the TV (SAT/CATV, DVD,
BD), so that an image from a connected
component is displayed.

“BRAVIA” Sync Features

What is “BRAVIA” Sync?

Note

Preparing for “BRAVIA”

Sync

?/1
AMP
MENU
C, X, x, c,