30GB
Tips
• When you connect a Sony TV, the audio input of
the TV is switched and the image from the TV
tuner is displayed on the TV screen automatically
by pressing the TV button. To change this setting,
see “Changing the input button assignments” (page
51).
• The sound may be output from the TV’s speaker.
In this case, turn the volume of the TV’s speaker
down to the minimum.
1Turn on the TV.
For details, refer to the operating
instructions of the TV.
2Turn on the satellite tuner or
Set-top box and the receiver.
3Press SAT.
You can also use INPUT SELECTOR on
the receiver to select “SAT”.
4Change the TV input.
For details, refer to the operating
instructions of the TV.
5Adjust the volume of the
receiver.
Tip
The sound may be output from the TV’s speaker. In
this case, turn the volume of the TV’s speaker down
to the minimum.
1Turn on the TV.
2Turn on the Blu-ray disc/DVD
player (recorder) and the
receiver.
3Press DVD or BD.
You can also use INPUT SELECTOR on
the receiver to select “DVD” or “BD”.
Be sure to change the factory setting of
the DVD input button on the remote so
that you can use the button to control your
DVD player. For details, see “Changing
the input button assignments” (page 51).
4Change the TV input.
For details, refer to the operating
instructions of the TV.
5Play back the disc.
6Adjust the volume of the
receiver.
Tip
Even if you playback Dolby True HD, Dolby Digital
Plus or DTS-HD with a connected component
compatible with these sound formats, the receiver
accepts as Dolby Digital or DTS. When you connect
the component to the receiver using an HDMI cable
to playback these high-quality sound formats, set the
connected component to output the sound in multi
channel PCM, if possible.
Enjoying a satellite tuner or
Set-top box
Enjoying Blu-ray disc/DVD