Installing the speakers on a flat surface

Before you install the speaker and sub woofer, be sure to attach the supplied foot pads to prevent vibration or movement as shown in the illustration below.

Example of HT-SS1200 front speaker

HT-SF1200 only

You need to attach the supplied foot pads to the center speaker and sub woofer only.

HT-SS1200 only

You need to attach the supplied foot pads to all the speakers and sub woofer.

Installing the speakers on the speaker stand

HT-SS1200 only

For greater flexibility in positioning the speakers, use the optional WS-FV11 or WS-FV10D speaker stand (available only in certain countries). Be sure to detach the screw from the speaker and use it when you install the speaker to the speaker stand. For details, refer to operating instructions supplied with the speaker stand.

HT-SF1200 only

For greater flexibility in positioning the speakers, use the supplied speaker stand. For details, refer to supplied speaker stand installation guide.

12GB

Installing the speakers on the wall

You can install your speakers on the wall.

1 Prepare screws (not supplied) that are suitable for the hook on the back of each speaker. See the illustrations below.

4 mm

more than 25 mm

4.5 mm

Hook on the back of the speaker

2 Fasten the screws to the wall. The screws should protrude 5 to 7 mm.

5 to 7 mm

3 Hang the speakers on the screws.