Amplifier Operation
Selecting the component
1 Press INPUT SELECTOR on the receiver to select the component you want to use.
To select the | Light up |
VCR | VIDEO |
|
|
DVD player | DVD |
|
|
Satellite tuner | TV/SAT |
|
|
TUNER |
2 Turn on the component and start playback.
Note
If you select the VCR or DVD player, set the TV’s video input to match the component you selected.
3 Turn MASTER VOLUME on the receiver to adjust the volume.
Note
To avoid damaging your speakers, make sure that you turn down the volume before you turn off the receiver.
To mute the sound
Press MUTING.
The muting function will be canceled when you do the following.
•Press MUTING again.
•Turn the power off.
•Increase the volume.
Listening to FM/AM radio
You can listen to FM and AM broadcasts |
| ||
| |||
through the |
| ||
make sure you have connected the FM and AM | Amplifier | ||
antennas to the receiver (see page 9). | |||
| |||
Tip |
|
| |
The tuning scale is: | Operation | ||
FM: | 50 kHz | ||
| |||
AM: | 9 kHz |
| |
Automatic tuning
If you do not know the frequency of the station you want, you can let the receiver scan all available stations in your area.
1 Press TUNER repeatedly to select the FM or AM band.
The last received station is tuned in.
Tip
You can also use INPUT SELECTOR on the
receiver.
2 Press TUNING + or TUNING
Press TUNING + to scan from low to high; press TUNING – to scan from high to low. The receiver stops scanning whenever a station is received.
Tip
If “STEREO” flashes in the display and the FM stereo reception is poor, press FM MODE to change to monaural (MONO). You will not be able to enjoy the stereo effect, but the sound will be less distorted. To return to stereo mode, press FM MODE again.
continued
17GB