Enjoying Surround Sound
Using only the front speakers and sub woofer— 2CH STEREO
In this mode, the receiver outputs the sound from the front left/right speakers and sub woofer only.
When multi channel surround formats are input, the signals are downmixed to 2 channel with bass frequencies being output from the sub woofer.
When standard 2 channel stereo sources are input, the receiver’s bass redirection circuitry will be activated. The front channel bass frequencies will be output from the sub woofer.
Press SOUND FIELD + or SOUND FIELD – repeatedly to select “2CH ST.”.
The receiver switches to the 2CH STEREO mode.
Enjoying higher fidelity sound
Decoding the input audio |
| |
| ||
signal automatically (AUTO |
| |
FORMAT DIRECT) | Enjoying | |
In this mode, the receiver automatically detects | ||
| ||
the type of audio signal being input (Dolby |
| |
Digital, DTS, standard 2 channel stereo, etc.) | Surround | |
and performs the proper decoding if necessary. | ||
| ||
This mode presents the sound as it was recorded/ |
| |
encoded, without adding any surround effects. |
| |
However, if there are no low frequency signals | Sound | |
(Dolby Digital LFE, etc.) it will generate a low | ||
| ||
frequency signal for output to the sub woofer. |
| |
Press A.F.D. |
| |
“A.F.D. AUTO” appears in the display. |
| |
The receiver automatically detects the type of |
| |
audio signal being input and performs the proper |
| |
decoding if necessary. |
|
continued
23GB