15US
“PRTECT (protect)” appears on the front panel display.
Press the button to turn off the system. After “STBY”
disappears, disconnect the AC power cord (mains lead), then check
that nothing is blocking the ventilation holes of the system.
RESET
If the system still does not operate properly, reset the system as
follows:
1Press the button to turn on the Bar Speaker.
2Press the button while pressing INPUT and VOL on the
Bar Speaker.
“RESET” appears and the system is reset. The menu, SOUND
MODE, etc., return to the default settings.
Specifications
Bar Speaker (SA-ST7)
Amplifier section
U.S. models:
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
(FTC)
Front L + Front R:
With 4 ohms loads, both channels driven, from 200 - 20,000 Hz; rated
25 Watts per channel minimum RMS power, with no more than 1%
total harmonic distortion from 250 milliwatts to rated output.
POWER OUTPUT (reference)
Front L/Front R speaker blocks: 50 Watts (per channel at 4 ohms,
1 kHz)
Center speaker block: 50 Watts (per channel at 4 ohms, 1 kHz)
Canadian models:
POWER OUTPUT (rated)
Front L + Front R: 35 W + 35 W
(at 4 ohms, 1 kHz, 1 % THD)
POWER OUTPUT (reference)
Front L/Front R speaker blocks: 50 Watts (per channel at 4 ohms,
1 kHz)
Center speaker block: 50 Watts (per channel at 4 ohms, 1 kHz)
Inputs
HDMI IN 1/2/3*
OPTICAL IN 1(TV)/2
ANALOG IN
COAXIAL IN
* These 3 jacks are identical. Using any of them makes no difference.
Output
HDMI TV OUT (ARC)
BLUETOOTH section
Communication system
BLUETOOTH Specification version 3.0
continued