xRecording on this unit during camcorder tape replacement
When connected to a camcorder that has an external REC control function, you can record video on this unit only while changing the tape of the camcorder.
|
|
|
| 5 minutes before end of tape |
| ||
Camcorder |
|
|
|
|
|
|
|
| REC |
| Changing the tape | REC |
| STANDBY | |
This unit |
|
| REC |
|
| STOP | |
|
|
|
| ||||
|
|
| |||||
|
|
|
|
|
| ||
STANDBY |
| REC |
|
| STANDBY |
1Press the CAM LINK button of this unit and set it to ON.
2Set the [CAM LINK SEL] setting of this unit to [SYNCHRO].
3Set the [EXT REC CTRL] setting of the camcorder to [RELAY].
4Connect the camcorder to this unit via an i.LINK cable.
5Press the REC START/STOP button of the camcorder to start recording.
•When the remaining time of the tape is less than 5 minutes, the camcorder sends a command to this unit to start recording.
•The recording by this unit can be stopped from the camcorder after changing the tape or by pressing the STOP button of this unit.
•The noise of the tape change is recorded.
•The above Step 3 is for the
•For details on camcorders that have an “external REC control” function and on motion detection, refer to the “Guide to supported models and their functions” supplied with this unit.
Notes
•During RELAY recording, the cache recording cannot be operated.
xRecording video from this unit
You can use this unit to start or stop recording a video input signal from an i.LINK without linked operation to a device connected via i.LINK.
Camcorder | STANDBY |
| REC |
|
| STANDBY | |||
This unit |
|
|
|
|
|
| |||
REC | STANDBY | REC | STANDBY | REC |
| STANDBY |
1Press the CAM LINK button of this unit and set it to OFF.
2Slide the REC button to start recording.
Cache recording mode
The most recent approximately maximum 14 seconds of video and audio captured by the camcorder are held in a buffer memory and automatically recorded when the recording button is pressed.
To set cache recording
Select [CACHE] from [REC MODE] on the menu screen.
Notes
•After cache recording, it may take about 30 seconds to write data of the cache part.
Interval recording mode
Records a series of videos at regular intervals. This function is useful to observe things like cloud movements or daylight changes. Only DVCAM/DV format is valid.
Selecting an interval recording time
Select [SETTING] t [INTERVAL] t [REC TIME] on the menu screen to set the time.
You can select [0.5sec], [1sec], [1.5sec] or [2sec].
Setting the interval time
Select [SETTING] t [INTERVAL] t [INT TIME] on the menu screen to set the time.
You can select [30sec], [1min], [5min] or [10min].
Setting interval recording
Select [INTERVAL] from [REC MODE] on the menu screen.
LCD screen display in interval recording mode
Remains on during recording and blinks during standby
10