Sony HXR-NX5U XtraFine EVF, Hardware Switch for Headphone Monitor, Versatile Terminal Interfaces

XtraFine EVF

The 0.45-inch-type XtraFine electronic viewfinder (EVF) has approximately 1,227,000 pixels

(852 x 3 (RGB) x 480). This device has three independent LEDs for Red, Green, and Blue colors.

The EVF has a selectable display mode (Color or Black and White mode). It also displays

virtually 100% of the recorded picture area at a color temperature of approximately 6500K,

and has an improved interface for easier viewing of the on-screen menu.

Hardware Switch for

Headphone Monitor

Ahigh-quality headphone monitor jack allows the user to instantly check the quality of recorded audio. The HXR-NX5U is equipped with a hardware switch so the user can change the output to Channel 1 or Channel 2, or mix both channels together. There is no need to go into the menu to change the headphone output.

Versatile Terminal Interfaces

1. HD-SDI

The HXR-NX5U is equipped with an HD-SDI*

ter minal, making it easier and more convenient to install the camcorder into high- end video editing systems. If the system has an HD-SDI input, the camcorder can be connected to the system with a BNC cable. No conversion boxes are needed. The camera's E to E output from the HDSDI terminal will be a 10 bit uncompressed 4:2:2 signal.

*Timecode and audio signals are embedded in the HD-SDI signal. *SD-SDI is also available.

2.HDMI terminals

The HDMI interface allows easy connection to consumer electronic devices.

3.RCA-pin-type composite and audio outputs terminals

4.Component output with AV/R-out

5.USB

6. Remote Terminal

7. TC Link

By connecting two camcorders with a standard mini-plug cable, using the TC Link function, timecodes of the two camcorders can be synchronized.

17