Erasing Messages
You can erase the recorded messages one by one or all messages in a folder at a time.
Note that once a recording has been erased, you cannot retrieve it.
Erasing messages one by one
When a message is erased, the remaining messages will advance and renumbered so that there will be no space between messages.
Before erasing | Message 1 | Message 2 | Message 3 | Message 4 Message 5 |
| Erase Message 3 |
| ||
After erasing |
|
|
| |
Message 1 | Message 2 Message 3 | Message 4 | ||
|
| Remaining messages are renumbered. | ||
1Press ERASE while playing back
the message you want to erase or press ERASE for more than 1 second during stop mode.
A beep will sound and the message number and “ERASE” will flash while the first and last 5 seconds of the message are played back 10 times.
2 Press ERASE while the message is being played back.
The message is erased and the remaining messages will be renumbered. (For example, if you erase Message 3, Message 4 will be renumbered as Message 3. When erasing is completed, the unit will stop at the beginning of the following message.)
To cancel erasingPress xSTOP before step 2.
Continued
Operations Basic