Preventing Accidental Operation— HOLD function

Slide the HOLD switch to “ON”. “HOLD” will flash three times, indicating that all the functions of the buttons are locked.

When the HOLD function is activated during stop, all the display will be turned off after “HOLD” flashes.

HOLD

To cancel the HOLD function

Slide the HOLD switch to “OFF” .

Note

When the HOLD function is activated during recording, cancel the HOLD function first to stop recording.

Tip

Even if the HOLD function is activated, you can stop the alarm playback. To stop the alarm or playback, press STOP.

Rear

USB connector

Battery compartment

Hook for handstrap (not supplied)

GB