Symptom | Remedy |
|
|
You cannot | •The remaining memory is too short. The |
add a recording or an | overwritten part will be deleted after the |
overwrite recording. | overwriting part finishes recording. Therefore, |
| you can only overwrite within the remaining |
| recording time. |
| •At a factory setting, |
| Display the menu and set the |
| (page 51) . |
|
|
Recording is | •The advanced VOR function (page 14) is |
interrupted. | activated. Set the VOR to “OFF”. |
Noise is heard. | •An object, such as your finger, etc., accidentally |
| rubbed or scratched the unit during recording |
| so that noise was recorded. |
| •The unit was placed near an AC power source, |
| a fluorescent lamp or a mobile phone during |
| recording or playback. |
| •Plug of the connected microphone was dirty |
| when recording. Clean the plug. |
| •The i (headphones) plug is dirty. Clean the |
| plug. |
|
|
Recording level is | •SENS (microphone sensitivity) is set to L. |
low. | Display the menu and set SENS to “H” (page |
| 53). |
| •If it is difficult to hear small sound of a |
| recorded message, slide VOICE UP to “ON”. |
| Playback sound may become more audible. |
Recording level is | •This unit is designed to automatically adjust |
unstable (when | the recording level when recording meetings, |
recording music, etc.). etc., and is not suitable for music recording.
Informatio Additional n
Recording is interrupted (when recording from an external device).
•If you use an audio connecting cable without a resistor to connect the sound source to the IC recorder, sound may be recorded interrupted. Make sure to use a resistance audio connecting cable.
Continued