3-272-042-31(2)

 

A

 

B

 

 

 

 

1

FM/AM Clock Radio

ICF-C1iP

Operating Instructions
Dream Machine is a trademark of Sony Corporation.No Power No problem is a trademark of Sony Corporation.© 2007 Sony Corporation Printed in China

RESET

2

RESET

FM wire aerialCR2032AC power cord

3

T

RESE

There is a tactile dot on the VOLUME +, N/X and PRESET TUNING 3 button.
There is a tactile dot on the VOL +, N/X, M and PRESET + button.

1

2

g

CR2025
WARNINGPrecautions
Disposal of waste batteries (applicable in the European Union and other
Connecting the
About the backup
If the time in the display is incorrect after the battery

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And do not place lighted candles on the apparatus.

The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.

As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately.

Notice for the customer in the countries applying EU Directives

The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.

WARNING

•Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

•Replace the battery for the clock backup with a Sony CR2032 lithium battery, and the battery for the remote commander with a Sony CR2025 lithium battery. Use of another battery may present a risk of fire or explosion.

•Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire.

•Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time.

•Dispose of used battery promptly. Keep away from children.
•Operate the unit on the power source specified in “Specifications”.

•To disconnect the power cord (mains lead), pull it out by the plug, not the cord.

•The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off.

•Allow adequate air circulation to prevent internal heat build-up. Do not place the unit on a surface (a rug, blanket, etc.) or near materials (a curtain) that might block the ventilation holes.

•Should any solid object or liquid fall into the unit, unplug the unit and have it checked by a qualified personnel before operating it any further.

•To clean the casing, use a soft cloth dampened with a mild detergent solution.•Do not connect the aerial lead to the external aerial.

•To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And do not place lighted candles on the apparatus.

NOTES ON LITHIUM BATTERY•Wipe the battery with a dry cloth to assure a good contact.•Be sure to observe the correct polarity when installing the battery.

•Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur.

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

European countries with separate collection systems)

This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste.

By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources.

In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment.

For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries.

For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

If you have any questions or problems concerning your unit, please consult your nearest Sony dealer.

Features
•Dual alarm FM/AM Clock radio with iPod dock.•Various type of alarms- iPod, radio and buzzer.

•Automatic time set — When you plug the clock in for the first time, the current time will be shown in the display.

•Automatic Daylight Saving Time/Summer time adjustment.•CLOCK button to display month, day and year.•Brightness control (High/Middle/Low).

•No Power No Problemalarm system to keep the clock and the alarm operating during a power interruption with a CR2032 battery installed.

aerial
To connect the AM loop aerial

The shape and the length of the aerial is designed to receive AM signals. Do not dismantle or roll up the aerial.

1Remove only the loop part from the plastic stand.2Set up the AM loop aerial.3Connect the cords to the AM aerial terminals.The cords (A and B) can be connected to either terminal.Insert the cord while pushing down the terminal clamp.
Only insert up

 

 

to here.

A

B

 

 

 

4Make sure the AM loop aerial is connected firmly by pulling softly.Adjusting the AM loop aerialFind a place and an orientation that provide good reception.

•Do not place the AM loop aerial near the unit or other AV equipment, as noise may result.

•If you use an external polarized AM aerial, be sure to connect the ground cord to the U terminal. The supplied AM aerial cord has no polarity.

TipAdjust the direction of the AM loop aerial for best AM broadcast sound.
battery

To keep good time, as a backup power source, this unit has one CR2032 battery inside of the unit in addition to the house current.

The battery keeps the clock and the alarm operating in the event of a power interruption.

Knowing when to replace the battery

If a power interruption occurs when the battery is weak, the brightness of characters in the display darkens. If the battery runs out during the interruption, the current time and alarm functions will be initialized.

Replace the battery with a Sony CR2032 lithium battery. Use of another battery may present a risk of fire or explosion.

Replacing the backup battery

1Keep the AC plug connected to the AC outlet, remove the screw that secures the battery compartment at the bottom of the

unit using a screwdriver, and remove the battery compartment. (See Fig. A-1)2Insert a new battery in the battery compartment with the e side facing up.To remove the battery from the batterycompartment, push it out from the side marked PUSH. (See Fig. A-2)3Insert the battery compartment back into theunit and secure it with the screw. (See Fig. A-3)Note

When you replace the battery, keep the AC plug connected to a wall outlet. Otherwise, current time and alarms will be initialized if the replacement is not completed within around one minute.

is changed (RESET)

Push the Reset switch with the pointed device. The Reset switch is in the small hole located in the battery compartment.

Notes•You cannot reset unless the lithium battery is installed.•Set the clock again after the unit is reset.Battery Warning

When the unit will be left unplugged for a long time, remove the battery to avoid undue battery discharge and damage to the unit from battery leakage.

Preparing the remote commander

Before using the card remote commander for the first time, remove the insulation film. (See Fig. B-1)

When to replace the battery

With normal use, the battery (CR2025) should last for about six months. When the remote commander no longer operates the unit, replace the battery with new ones. (See Fig. B-2)

Notes

•Do not charge the battery.

•When you are not going to use the remote commander for a long time, remove the battery to avoid any damage caused by leakage and corrosion.