FM/AM
Clock Radio
Operating Instructions
ICF-C7iP
Dream Machine is a trademark of Sony Corporation.No Power No Problem is a trademark of Sony Corporation.| ©2009 Sony Corporation | Printed in China |
Owner’s Record
The model number and the serial number are located on the bottom.Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
Model No.Please register this product on line at http://www.sony.com/productregistration. Proper registration will enable us to send you periodic mailings about new products, services, and other important announcements. Registering your product will also allow us to contact you in the unlikely event that the product needs adjustment or modification. Thank you.
WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And do not place lighted candles on the apparatus.
To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus.
Do not install the appliance in a confined space, such as a bookcase or
Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time.
As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately.
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
CAUTIONDanger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
| — Reorient or relocate the receiving |
| antenna. |
| — Increase the separation between the equipment |
| and receiver. |
— Connect the equipment into an outlet on a circuit |
Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire.
Dispose of used battery promptly. Keep away from children.Important Safety
Instructions
1)Read these instructions.2)Keep these instructions.3)Heed all warnings.4)Follow all instructions.5)Do not use this apparatus near water.6)Clean only with dry cloth.7)Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9)Do not defeat the safety purpose of the polarized or
10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11)Only use attachments/accessories specified by the manufacturer.12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from
13)Unplug this apparatus during lightning storms or when unused for long periods of time.
14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
Perchlorate Material
Features
Wake or sleep to iPod/RadioDual AlarmFM/AMPrecautions
| Play the unit on the power source specified in |
| “Specifications.” |
| To disconnect the AC power cord (mains lead), |
| pull it out by the plug, not the cord. |
| The unit is not disconnected from the AC |
| power source (mains) as long as it is connected |
| to the wall outlet, even if the unit itself has been |
| turned off. |
| Since a strong magnet is used for the speaker, |
| keep personal credit cards using magnetic coding |
| or |
| prevent possible damage from the magnet. |
| Do not leave the unit in a location near a heat |
| source such as a radiator or airduct, or in a |
| place subject to direct sunlight, excessive dust, |
| mechanical vibration, or shock. |
Do not hold the battery with metallic tweezers, otherwise a
If you have any questions or problems concerning your unit, please consult your nearest Sony dealer.
Troubleshooting
Should any problem persist after you have made the following checks, consult your nearest Sony dealer.
The clock flashes “AM 12:00” due to a power interruption.The battery is low. Replace the battery. Remove the old battery and install a new one.
The radio, iPod or buzzer alarm does not sound at the preset alarm time.Check that alarm “A” or alarm “B” is properly displayed.The radio or iPod alarm is activated but no sound comes on at the preset alarm time.
Check the alarm volume setting.There is no sound from the iPod.Make sure the iPod is securely connected.Adjust the VOLUME.The iPod cannot be operated with this unit.Make sure the iPod is securely connected.
The iPod cannot be charged.Make sure the iPod is securely connected.
When daylight saving time begins, the clock does not employ the daylight saving time automatically.
Make sure the clock is set correctly.Press and hold CLOCK and SNOOZE/DATE/ SLEEP OFF simultaneously for at least2 seconds to activate the Automatic DST function.Specifications
iPod sectionDC out: 5VMAX: 500mARadio sectionFrequency range| Band | Frequency | Channel step |
|
|
|
FM | 87.5 – 108 MHz | 0.1 MHz |
AM | 530 – 1 710 kHz | 10 kHz |
Approx. 115 × 124.7 × 97.1 mm (w/h/d) (4 9/16 × 4 15/16 × 3 7/8 inches) not including projecting parts and controls
MassApprox. 910 g (2 lb 0.09 oz) including power supply unitSupplied accessoriesRemote commander (1) AM loop antenna (1) Audio connecting cable (1) Universal dock adapter for iPhone (1) Universal dock adapter for iPhone 3G (1)
Design and specifications are subject to change without notice.Compatible iPod models
The compatible iPod models are as follows. Update your iPod to use the latest software before you use it.
iPod nano |
|
|
4th generation | iPod touch | iPhone 3G |
(video) | ||
| 2nd generation |
|
iPod nano 3rd
generation (video)
iPod touch | iPod classic |
|
| iPod nano 2nd |
|
| generation | iPod 5th |
iPhone | (aluminum) | generation (video) |
iPod nano 1st |
|
|
generation | iPod 4th generation | iPod 4th |
| (color display) | generation |
iPod mini
NotesIn these Operating Instructions, “iPod” is used as a general reference to iPod functions on an iPod or iPhone, unless otherwise specified by the text or illustrations.
The connector of the unit is for sole use with an iPod. If you use devices that do not match with the connector, connect to the AUDIO IN terminal of this unit with the supplied audio connecting cable.
Sony cannot accept responsibility in the event that data recorded to an iPod is lost or damaged when using an iPod connected to this unit.
Connecting the antenna
To connect the AM loop antenna
The shape and the length of the antenna is designed to receive AM signals. Do not dismantle or roll up the antenna.
1Remove only the loop part from the plastic stand.2Set up the AM loop antenna.3Connect the cords to the AM antennaterminals.Cord (A) or cord (B) can be connected to either terminal.Insert the cord while pushing down the terminal clamp.
Do not place the AM loop antenna near the unit or other AV equipment, as noise may result.
TipAdjust the direction of the AM loop antenna for best AM broadcast sound.Preparing the remote commander
Before using the card remote commander for the first time, remove the insulation film (See Fig.
The and VOL + buttons have a tactile dot.
CR2025When to replace the battery
With normal use, the battery (CR2025) should last for about six months. When the remote commander no longer operates the unit, replace the battery with a new one (See Fig.
Notes
Do not attempt to charge the battery.If you are not going to use the remote commander for a long time, remove the battery to avoid any damage that may be caused by leakage and corrosion.
About the backup battery
To keep accurate time, this unit contains a CR2032 battery inside of the unit as a backup power source.
The battery keeps the clock operating in the event of a power interruption.Knowing when to replace the battery
When the battery becomes weak, “” appears in the display.If a power interruption occurs while the battery is weak, the current time and alarm will be initialized.
Replace the battery with a Sony CR2032 lithium battery. Use of another battery may cause a fire or explosion.
NoteIf “AM 12:00” flashes in the display when the unit is connected to AC outlet for the first time, the battery may be weak. In this case, consult your Sony dealer.
Replacing the battery
1Keep the AC plug connected to the AC outlet, remove the screw that secures the battery holder at the bottom of the unit using a screwdriver, and remove the battery holder (See Fig.
2Replace a new battery in the battery holder with the side facing up (See Fig.
3Insert the battery holder back into the unit and secure it with the screw (See Fig.
Note
When you replace the battery, do not disconnect the plug from the AC outlet. Otherwise, the calendar, current time, alarm and station presets will be initialized.
CR2032
| different from that to which the receiver is |
| connected. |
| — Consult the dealer or an experienced radio/TV |
| technician for help. |
| Allow adequate air circulation to prevent |
| internal heat |
| a surface (a rug, a blanket, etc.) or near |
| Only insert up |
|
|
| to here. | A | B |
| ||
|
|
This unit includes a preinstalled Sony Lithium battery (CR2032) as
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
WARNINGReplace the battery for the clock backup with a Sony CR2032 lithium battery, and the battery for the remote commander with a Sony CR2025 lithium battery. Use of another battery may present a risk of fire or explosion.
| materials (a curtain) which might block the |
| ventilation holes. |
| Should any solid object or liquid fall into the unit, |
| unplug the unit and have it checked by qualified |
| personnel before operating it any further. |
| To clean the casing, use a soft cloth dampened |
| with a mild detergent solution. |
| Never touch the wire of the external FM |
| antenna during a thunderstorm. Furthermore, |
| immediately disconnect the AC power cord |
| from the radio. |
changed (Reset)
Press the Reset button with a pointed device. The Reset button is in the small hole located near the battery holder.