Attaching a lens
Preparing the camera
GB
55
Notes
•When attaching a lens, do not press the lens release button.
•Do not use force when attaching a lens.
•The Mount Adap tor (sold separately) is required to use an A-mount lens (sold
separately). To use the Mount Adaptor, refer to the operating manual supplied with
the Mount Adaptor.
•When you want to shoot full-frame im ages, use a lens designed for a full-frame
camera.
•When carrying the camera with a lens attached, hold both the camera and the lens
firmly.
•Do not hold the part of the lens that is extended for the zoom or focus adjustment.
To remove the lens
Notes on changing the lens
When changing the lens, if dust or debris gets inside the camera and
adheres to the surface of the image sensor (the part that converts the light to
an electric signal), it may appear as dark spots on the image, depending on
the shooting environment.
The camera is equipped with an anti-dust function to prevent dust from
landing on the image sensor. However, always make sure to quickly change
the lens away from dusty locations when attaching/removing a lens.
1Press the lens release button all
the way in and turn the lens
counterclockwise until it stops.
2Attach the caps to the front and
rear of the lens and the body cap
to the camera.
• Before you attach them, remove any
dust from them.
Lens release button