GB

In-car Cradle Instruction Manual

For use with the PSP™ (PlayStation®Portable) system and GPS receiver

Precautions

•Before using this product, carefully read this manual and retain it for future reference. Also refer to the instructions for your PSP™ (PlayStation®Portable) system.

•Make sure you install the cradle securely in accordance with these installation instructions. Attach the PSP™ system to the cradle and ensure that the cradle is firmly mounted on the windscreen.

•Do not use with products other than the PSP™ system.

•Never disassemble or modify this product.

•Do not throw or drop this product, or physically damage it in any way.

•Do not install this product over an airbag cover or within the airbag deployment zone.

•The PSP™ system should never be operated by a driver whilst the vehicle is in motion.

•Cradle should not obstruct driver’s normal line of vision.

•Cradle should be positioned to enable driver to view PSP™ system without taking their eyes off the road for a long period of time.

•Nothing in this manual shall affect any statutory rights and remedies the consumer may have in respect of this product in any way.

•Insert and remove the PSP™ system carefully from the cradle to avoid scratching or damage. The spacer inserts must only be used when inserting a PSP-2000 series system into the cradle. Do not attempt to insert a PSP-1000 series system into a cradle with the spacer inserts in place.

ContentsB

APedestal B Cradle

C Spacer inserts

A

C

Pedestal and T-Tab Head Instructions

Step 1. Adjust the angle of the arm by loosening the adjustment knob (3).

Step 2. Adjust the angle and rotation of the pedestal head by loosening the tightening knob (4).

Step 3. Attach the cradle to the T-tab head (5) by inserting the T-tabs into the T-slots (6).

5

4

6

3

Cradle Instructions for PSP-2000 Series

Step 1. Insert the PSP™ system into the cradle by sliding it straight down until it rests on the support legs (7).

7

Cradle Instructions for PSP-1000 Series

Step 1. Remove the spacer inserts* (8) by pushing them up until they detach from the cradle. This creates enough space to accommodate the PSP-1000 series system.

Step 2. Follow Step 1 of ‘Cradle Instructions for PSP-2000 Series’ as outlined previously.

8

Installing on the Windscreen

Step 1. Push the pedestal suction cup (1) firmly to the windscreen. Flip the lever (2) up to secure the suction cup.

*The spacer inserts are designed to enable PSP-2000 series systems to fit securely in the cradle. The spacer inserts must only be used when inserting a PSP-2000 series system into the cradle.

2

1

For contact details please visit www.playstation.com

© 2008 Sony Computer Entertainment Europe.

“”, “PlayStation” and “ ” are trademarks or registered trademarks of Sony Computer Entertainment Inc. All rights reserved.