Function selectorAC power cordFM wire antenna
ALARM
RADIO BUZZERThere is a tactile dot beside VOL to show the direction to turn up the volume.

Setting the Clock

1Plug in the unit.The display will flash “AM 12:00” or “0:00”.2To set the hour, while holding down
CLOCK, press TIME SET H. When the correct hour appears in the display, release
CLOCK.3To set the minute, while holding down

CLOCK, press TIME SET M. When the correct minute appears in the display, release CLOCK.

The clock will begin to operate when you releaseTIME SET M.•The clock system varies depending on the model you own.12-hour system: “AM 12:00” = midnight24-hour system: “0:00” = midnight•Each press on TIME SET H or TIME SET M advances the displayed number by one.

•The minute digits advance to “00” after “59”. The hour digits do not advance by pressing TIME SET

M.

•To adjust the time exactly to the second, set the time one minute behind the time you want to set. Press TIME SET M simultaneouly with the time signal.

Operating the Radio

1Set the function selector to RADIO ON to turn on the radio and adjust VOL (volume).

2Select BAND and tune in a station usingTUNING.•To turn off the radio, set the function selector toOFF.

Improving the Radio Reception

FM: Extend the FM wire antenna fully to improve reception.

AM: Rotate the unit horizontally for optimum reception. A ferrite bar antenna is built into the unit.

Do not operate the unit over a steel desk or metal surface, as this may lead to interference of reception.

Setting the Alarm

To set the radio alarm, first tune in to a station and adjust the volume.

1To set the hour for alarm, while holding down ALARM, press TIME SET H. When the desired hour appears in the display, release ALARM.

2To set the minute for alarm, while holding down ALARM, press TIME SET M. When the desired minute appears in the display, release ALARM.

3Set the function selector to ALARM MODE • RADIO or ALARM MODE •BUZZER.

The alarm setting will be indicated in the display. The alarm will come on at the preset time and automatically turn itself off after 119 minutes.

•To shut off the alarm, set the function selector to

OFF.

To sound the alarm at the preset time the next day, set the function selector to ALARM MODE • RADIO or ALARM MODE • BUZZER again.

•To deactivate the alarm, set the function selector to

OFF.

The alarm indicator will be turned off.•To doze a few more minutes, press SNOOZE/SLEEP OFF.

The alarm will shut off but will come on again after about 9 minutes. (While the snooze function is operating, the alarm indication is shown in the display until the alarm function is deactivated.) You can use this function as many times as you like.

•To adjust the radio alarm volume, turn VOL. The buzzer volume is fixed.•To check the preset time, press ALARM.

Setting the Sleep Timer

Enjoy falling asleep to the radio using the built-in sleep timer that shuts off the radio automatically.

1While listening to the radio, set the function selector to OFF.2Press SLEEP.The radio turns on. It will go off after 59 minutes.•To turn off the radio before the preset time, pressSNOOZE/SLEEP OFF.•Every time you press SLEEP, the sleep timer is reset to 59 minutes.

•When you set the function selector to ALARM MODE • RADIO or ALARM MODE • BUZZER, if the preset alarm time comes while the sleep timer is operating, the radio or buzzer sounds depending on which you set.