Checking the supplied
KD-32DX100U 1 accessories
The following accessories are included with your TV.
Thank you for purchasing this
Sony Trinitron Digital Television.
After following this step by step guide you will be able to:
Insert batteries into the remote control.
3 | Connecting the TV |
Connecting an aerial only
Connect the aerial to your TV.
RF Loopthrough cable
Existing aerial lead
Connect a video cassette recorder (VCR) to your TV.
Tune your TV.
View TV programmes.
Batteries
Remote Control
RF Loopthrough cable (supplied)
1Connect your existing aerial lead to the Digital socket marked 
on the rear of the TV as shown.
2Connect the supplied RF loopthrough cable from the sockets marked 
to the Analogue socket marked 
.
Connecting an aerial and a VCR
Quick Start Guide
2 | Inserting | batteries into |
the remote control | ||
| Insert the batteries as shown below. | |
1 | 2 | 3 |
Always remember to:
•observe the correct polarity when inserting batteries,
•dispose of batteries in an environmentally friendly way.
Existing aerial lead
Scart lead | RF Loopthrough |
(not supplied) | cable (supplied) |
RF Lead
(not supplied)
Rear of VCR
1Connect your existing aerial lead to the Digital socket marked 
on the rear of the TV as shown.
2Connect the supplied RF loopthrough cable from the aerial socket marked 
on the TV to the RF input socket of your VCR.
3Connect an RF lead from the RF output of your VCR to the Analogue TV socket marked 
.
4 Connect a scart lead from the scart socket marked 
3/ s 3 on the rear of the TV to a scart socket on your VCR (Refer to the VCR instructions).
5Connect the VCR to the mains socket and switch on.
6Insert a