4

Switching on the TV

5

Automatically tuning the TV

When you first switch on your new TV you need to tune in all the available channels. The ‘Auto Tune’ feature automatically searches and stores all the available channels for you. The following instructions and illustrations will guide you through this procedure.

Choosing the language.

On/Off button

1Connect the TV plug to your mains socket (220 - 240V AC, 50 Hz) and switch on.2Push in the On/Off button () on the front of the TV.

 

VIDEO /

 

TV /

DIGITAL/ button

DIGITAL

 

 

 

 

 

 

1

2

3

Numbered buttons

4

5

6

 

7

8

9

 

 

0

 

Control Pad OK (v,V, OK buttons)

PROG +/- buttons

1.When you switch on the TV for the first time the Language/Country menu appears on the TV screen with the word ‘English’ highlighted. Press the V or v buttons on the remote control to choose your required language. Press the OK button to confirm.

2.The word ‘Country’ is now highlighted. Press the V or v buttons on the remote control to choose the country in which you are using this TV. Press the OK button to confirm.

Choosing the country.

Note: The Digital features of this TV are designed for use in Great Britain only.

3.The autotune prompt screen appears. Press the OK button to select ‘Yes’. The autotune procedure begins, first tuning in all available Digital channels.

As this may take some time, a display appears on the TV screen to inform you of the tuning progress.

When all the available Digital channels are found, the analogue tuning display appears and The autotune prompt screen. all the analogue channels are captured and stored.

If no Digital and no analogue channels are found, a display appears on the TV screen asking you to confirm your aerial is connected. Check the aerial has been connected correctly then press the OK button to repeat the tuning process.

Once all Digital and analogue channels have been captured and stored, the TV returns to normal operation and displays the Digital channel stored on channel number 1.

Tuning the Digital channels.

Note: If no Digital channels are captured, the analogue channel that is stored on channel number 1 is displayed.

If the red standby mode indicator on the front of the TV is lit, press the TV / button on the remote control to switch on the TV set. Please be patient as the picture may take a few moments to appear on the TV screen.

4. To view programmes, press the PROG+/- buttons or the numbered buttons.

Your television stations are now stored in your television’s memory.

6

Selecting Digital

or analogue mode

7

Watching a pre-recorded video tape

Banner indicating TV is in Digital mode

Press the DIGITAL/ button on the remote control to switch between Digital and analogue mode.

To check if you are watching a Digital or analogue mode press the PROG +/- button. If you are watching a digital programme a banner will appear momentarily at the top of the screen. In analogue mode, this banner is not present.

DIGITAL/ button

/ button

1.With a pre-recorded video tape inserted into your VCR, press the ‘PLAY’ button on the VCR. The TV automatically displays the video picture (providing that you have used a fully wired 21 pin scart lead to connect your VCR to the TV).

VIDEO /

TV /

DIGITAL

If the video picture does not automatically appear, press the / button on the remote control repeatedly until

 

the video picture is displayed on the TV screen.
2. Press the DIGITAL/ button on the remote control to return to normal TV mode.

Note: Alternatively, with the TV in analogue mode, press the PROG +/- buttons on the remote control until the picture from the pre-recorded video tape appears on the TV screen.

If you wish to move your video channel to a different channel number, refer to the ‘Programme Sorting’ feature in ‘The Set Up menu’ section of this instruction manual.