Getting started
5 
Automatically tuning the TV
1 2 3
4 5 6
7 8 9
0
1. When you switch on the TV for the first time, the Language/Country menu appears on the TV screen with the word ‘English’ highlighted. Press the V or
v buttons on the remote control to highlight your required language then press the OK button to confirm your choice. From now on all menus appear in your chosen language.
2.The word Country is now highlighted. Press the V or v buttons to highlight the country in which you are using the TV. Press the OK button to confirm your choice.
Note:
The digital features of this set are designed for use in Great Britain only.
The picture rotation prompt appears. Sometimes the Earth’s natural magnetism can cause the screen to look tilted.
a)If no correction is required, press the B button.
b)If some correction is required, press the OK button. Press the V or v button to rotate the picture over a range of
The autotune prompt screen appears. Press the OK button to select Yes and begin the digital autotune procedure.
When all the available digital programmes are found, the analogue tuning display appears and all the analogue signals are captured and stored.
If no digital and no analogue signals are found, a display appears on screen asking you to confirm your aerial is connected. Check your aerial is connected then press the OK button to repeat the tuning procedure.
Once all signals have been captured and stored, the TV returns to normal operation and displays the digital programme captured on programme number 1.
Note:
If no digital signals are captured, then the analogue programme stored on programme number 1 is displayed.
3. To view programmes, press the PROG+/- button or the numbered buttons on the remote control.
OK
PROG
6