Start Guide
KD-32NX100U
Thank you for purchasing this
Sony Trinitron Digital Television.
Follow this step by step guide to:
Insert batteries into the remote control.
Connect the aerial to your TV.
Connect a video cassette recorder (VCR) to your TV.
Tune your TV.
View TV programmes.
Checking the supplied
1 accessories
The following accessories are included with your TV.
L |
|
DIGITA |
|
| 5 |
| 0 |
MODE | REC |
RF Loopthrough cable
Batteries
Remote Control
3 | Connecting an aerial |
and a VCR |
Connecting an aerial only
Supplied RF | Existing | |
loopthrough | ||
aerial | ||
cable | ||
|
1.Connect your existing aerial lead to the Digital socket marked 
on the rear of the TV as shown.
2.Connect the supplied RF loopthrough cable from the socket marked 
to the analogue socket marked 
.
Connecting an aerial and a VCR
Quick
2 | Inserting batteries into |
the remote control |
1 |
| 2 |
| 3 |
|
|
|
|
|
|
|
|
|
|
Place a coin in the slot | Insert the batteries as |
| Replace the battery | |
provided at the bottom of | indicated in battery |
| compartment and lock in | |
the remote control. Turn | compartment. |
| place by twisting coin | |
anti clockwise to release |
|
| clockwise in slot. | |
the battery compartment. |
|
|
| |
Always remember to dispose of batteries in an environmentally friendly way.
Scart lead (not supplied)
RF lead
(not supplied)
RF loopthrough cable (supplied)
1.Connect your existing aerial to the Digital socket marked 
on the rear of the TV as shown.
2.Connect the supplied RF loopthrough cable from the lower socket marked 
on the TV to the RF IN socket on your VCR.
3.Connect a lead from the RF output of your VCR to the Analogue socket
marked 
on the TV.
4.Connect a scart lead from the socket marked 
3
s 3 on the rear of the TV to the scart socket of your VCR (refer to VCR instructions).
5.Connect the VCR to the mains socket and switch on.
6.Insert a