Connecting other equipment

Connecting Other Equipment to the TV

A wide range of equipment can be connected to the TV through the front and rear sockets.

Connecting equipment to the rear sockets

C

B

E

(SMARTLINK)

3 s 3

VCR

2

DVD

1

DIGITAL

OPTICAL OUTPUT

ANALOGUE

MODEM . . . 5V 200mA

R/D/D/D L/G/S/I

VCR

A D

MD/DAT

DVD

Hi-Fi

Decoder/Set top box

Note: Connecting cables are not supplied.

Connecting a DVD player

1. Connect a scart lead from the Bsocket of the TV to a scart socket on your DVD player (refer to your DVD instruction manual)

2.

3.

Insert a DVD into the DVD player, then press the ‘PLAY’ button. The picture appears automatically on the TV.

If not, press the / button on the remote control repeatedly until the picture appears on screen.

Press the DIGITAL/ button when you wish to return to normal TV operation.

Connecting a Decoder/Set top box

1. Connect a scart lead from the A socket of the TV to a scart socket on your set top box (refer to your set top box instruction manual).

2.

3.

Switch on your set top box. The picture appears automatically on the TV.

If not, press the / button on the remote control repeatedly until the picture appears on screen.

Press the DIGITAL/ button when you wish to return to normal TV operation

Connecting a Smartlink VCR

Smartlink is a direct link between the TV and a Smartlink VCR. Ensure your Smartlink VCR is connected to the C socket labelled (SMARTLINK) i3/r3 VCR, using a fully wired 21 pin scart lead. For more information on Smartlink, refer to your Smartlink VCR instruction manual.

34