Remote Control
Inserting Batteries into the Remote Control
Insert two size AA batteries (supplied) by matching e and E on the batteries to the diagram inside the battery compartment of the remote control.
Push to 
open
~
•To avoid possible damage from battery leakage, remove the batteries if you anticipate the remote control will not be used for an extended period.
•Handle the remote control with care. Avoid dropping it, getting it wet, or placing it in direct sunlight, near a heater, or in high humidity.
Button Descriptions
1
2
3
4
Button Description
1DISPLAY Press once to display the information pertaining to the channel and/or program when available. The OSD (On Screen Display) will time out in a few seconds or press again to immediately turn off the display. You can also set the display to show minimal information. See Info Banner on page 38.
2SLEEP Press repeatedly until the TV displays the time in minutes
(Off, 15min, 30min, 45min, 60min, 90min or 120min) that you want the TV to remain on before shutting off. To cancel Sleep Timer, press SLEEP repeatedly until Off appears.
3THEATER Press to turn on and off the Theater Mode. This feature allows you to enjoy the Cinema mode (see page 28) with your A/V receiver. You must connect an A/V receiver that supports the HDMI Control. TV’s speakers will be automatically muted.
4FREEZE Press once to display the frozen image of the current program in the left window. The window on the right will display the current program in progress. Press again to return to the program.
Frozen |
|
|
|
|
| Current |
picture |
|
|
|
|
| program |
|
|
|
|
|
|
|
~
•With the Freeze feature active, some features are unavailable.
•While the Freeze feature is active, pressing HOME will deactivate the Freeze and display the XMB™.
~
•The 5 button and CH + have a tactile dot. Use them as a reference when operating the TV.
•This remote control cannot be programmed to use with other equipment.
22