Set-up menu

 

Set Up

 

 

 

 

 

 

 

Auto Start Up

 

 

 

 

 

 

 

Language

English

 

 

 

 

 

 

Country

-

 

Auto Tuning

Programme Sorting

AV Preset

Sound Offset

Manual Programme Preset

Digital Set Up

Back:

Select:

Enter:

Exit: MENU

 

 

 

 

You can select the options listed below on the Set-up menu. To select options in “Settings”, see “Navigating through menus” (page 19).

Auto Start-up

Starts the “first time operation menu” to select the language and country/region, and

 

tune in all available digital and analogue channels. Usually, you do not need to do

 

this operation because the language and country/region will have been selected and

 

channels already tuned when the TV was first installed (page 5, 6). However, this

 

option allows you to repeat the process (e.g., to retune the TV after moving house,

 

or to search for new channels that have been launched by broadcasters).

 

 

Language

Selects the language in which the menus are displayed.

 

 

Country

Selects the country/region where you operate the TV.

 

Tip

 

 

The country/region in which you want to use the TV does not appear in the list, select

 

“-” instead of a country/region.

 

 

Auto Tuning

Tunes in all the available analogue channels.

 

Usually you do not need to do this operation because the channels are already tuned

 

when the TV was first installed (page 5, 6). However, this option allows you to

 

repeat the process (e.g., to retune the TV after moving house, or to search for new

 

channels that have been launched by broadcasters).

 

 

Programme Sorting

Changes the order in which the analogue channels are stored on the TV.

 

1 Press F/f to select the channel you want to move to a new position,

 

 

then press g.

 

2

Press F/f to select the new position for your channel, then press .

 

 

AV Preset

Assigns a name to any equipment connected to the side and rear sockets. The name

 

will be displayed briefly on the screen when the equipment is selected. You can skip

 

an input source that is not connected to any equipment.

 

1

Press F/f to select the desired input source, then press .

 

2

Press F/f to select the desired option below, then press .

 

 

• AV1 (or AV2/ AV3/ AV4/ PC/ HDMI), VIDEO, DVD, CABLE, GAME, CAM, SAT:

 

 

Uses one of the preset labels to assign a name to connected equipment.

 

 

• “Edit”: Creates your own label.

 

 

• “Skip”: Skips an input source that is not connected to any equipment when you

 

press F/f to select the input source.

 

 

Sound Offset

Sets an independent volume level to each equipment connected to the TV.

 

 

 

Continued

Functions MENU Using

25 GB