53
Other Information
3Adjust the angle of the Mounting Hook.
4Align the holes on the right Mounting Hook with the corresponding holes on the rear of the
TV.
Secure them to the TV using two screws (supplied with SU-WL100).
Step 6: Installing the TV on the Base Plate
Refer to the Instructions for SU-WL100.
1Connect the cables to the corresponding inputs on the rear of the TV.
For details on the cable connection, see “Connecting Other Equipment” on page 13.
2Install the TV onto the Base Plate.
Mounting Hook
Arm
Screw
(+PSW 4 × 12)
Mounting Hook
• When using an electric screwdriver to tighten the screws, the torque must be approximately
1.5 N·m {15 kgf·cm}. Do not lift the Mounting Hook before the screws (two screws each for
left /right) are secured.