34 GB
Label
Assigns a name of your choice, up to five letters or numbers, to the selected channel.
AFT
Allows you to fine-tune the selected programme number manually if you feel that a
slight tuning adjustment will improve the picture quality.
Audio Filter
Improves the sound for individual channels in the case of distortion in mono
broadcasts. Sometimes a non-standard broadcast signal can cause sound distortion or
intermittent sound muting when watching mono program mes.
If you do not experience any sound distortion, we recommend th at you leave this
option set to the factory setting “Off”.
~
• “Audio Filter” is not ava ilable when “System” is set to “L”.
Skip
Skips unused analogue channels when you press PROG/CH +/- to select channels.
(You can still select a skipped channel using the number buttons.)
Confirm
Saves changes made to the “Manual Programme Preset” settings.
“Programme Sorting” (Only in analogue mode): Changes the order in which the
analogue channels are stored on the TV.
1Press F/f to select the channel you want to move to a new position,
then press g.
2Press F/f to select the new position for your channel, then press .
Digital Set-up “Digital Tuning”
•“Digital Auto Tuning”:
Tunes in the available digital channels.
This option allows you to retune the TV after moving house, or to sear ch for new
channels that have been launched by broadcasters. Press .
•“Programme List Edit”:
Removes any unwanted digital channels stored on the TV, and changes the o rder
of the digital channels stored on the TV.
1Press F/f to select the channel you want to remove or move to a new
position.
Press the number buttons to enter the known three-dig it programme number of the
broadcast you want.
2Remove or change the order of the digital channels as follows:
To remove the digital channel
Press . After a confirmation message appears, press
G
to select “Yes”, then press .
To change the order of the digital channels
Press g, then press F/f to select the new position for the channel and press G.
3Press RETURN.
~
• When “Cable” is selected this function may not be available in some countries.
•“Digital Manual Tuning”:
Tunes the digital channels manually.
1Press the number button to select the channel number you want to
manually tune, then press F/f to tune the channel.
2When the available channels are found, press to store programmes.
Repeat the above procedure to manually tune other channels.
~
• Not available for Cable connection.