28 GB
Wireless LAN Ready
Wireless LAN Ready lets you easily access the
Internet and your home network with the USB
Wireless LAN Adapter UWA-BR100 (as of
January 2010). By inserting the USB Wireless
LAN Adapter into your TV’s USB port, you
can easily create a cable-free network.
~
• Before setting up the wireless LAN function of the
TV, be sure to set up a wireless LAN router.
• The USB Wireless LAN Adapter is supplied or
available as an optional accessory, depending on
your TV model. In some regions/countries, the
USB Wireless LAN Adapter may not be available.
• This feature is not supported with the USB
connector on the front of PlayStation™2.
Using the Wireless LAN Ready feature you
can connect the TV to your wireless LAN. The
set-up procedure differs depending on the type
of wireless LAN and wireless LAN router.
Before setting up a wireless LAN, check your
wireless LAN environment using the
following chart.
1Secure wireless LAN ?
YES: Go to 2.
NO: Configure the following “Network
Set-up” and “Unsecured Network with
Any Type of Wireless LAN Router”.
2Do you use a wireless LAN router
compatible with Wi-Fi Protected Setup
(WPS) ?
YES: Configure the following “Network
Set-up” and “Secured Network with Wi-Fi
Protected Setup (WPS)”.
NO: Configure the following “Network
Set-up” and “Secured Network without
Wi-Fi Protected Setup (WPS)”.
The start-up screen of “Network Set-up”
allows you to select a setting procedure
according to your network environment.
“View Network Status”: Select to confirm
your network status.
“Wired Set-up”: Use to connect to a wired
network.
“Wireless Set-up”: Use to connect to a
wireless network.
The WPS standard makes security of a
wireless home network as straightforward as
pressing the WPS button on the wireless LAN
router. Before setting up a wireless LAN,
check the position of the WPS button on the
router and verify how to use it.
1Select “Wireless Set-up” from the
“Network Set-up” start-up screen.
2Select “WPS (Push Button)” fo r Push
Button method or “WPS (PIN)” for PIN
method.
3Follow the instructions appeared on the
set-up screen.
~
• To connect to a wireless LAN with WPS, your
wireless LAN router needs to support the WPS
standard.
For setting up a wireless LAN, SSID (wireless
network name) and security key (WEP or
WPA key) will be required. If you do not know
them, consult the instruction manual of your
router.
1Select “Wireless Set-up” from the
“Network Set-up” start-up screen.
2Select “Scan”, then select a network from
the list of scanned wireless networks.
3Follow the instructions that appear on the
set-up screen.

Connecting to Your Wireless LAN

Network Set-up

Secured Network with Wi-Fi

Protected Setup (WPS)

Secured Network without Wi-Fi

Protected Setup (WPS)