8 GB
8: Auto-tuning the TV1Before you start auto-tuning the TV, insert
a pre-recorded tape into the VCR
connected to the TV (page 5) and start
play back.
The video channel will be located and stored on
the TV during auto-tuning.
If no VCR is connected to the TV, skip this step.
2Press .
The TV starts searching for all available digital
channels, followed by all available analogue
channels. This may take some time, so do not
press any buttons on the TV or remote while
proceeding.
If a message appears for you to confirm the
aerial connection
No digital or analogue channels were found.
Check all the aerial connections and press to
start auto-tuning again.
3When the Programme Sorting menu
appears on the screen, follow the steps of
“Programme Sorting” (page 27).
If you do not change the order in which the
analogue channels are stored on the TV, go to
next step.
4When the Eco Preset menu appears on
the screen, if you press “Yes,” the “Eco”
settings are changed to recommended
values to reduce power consumption.
5Press MENU to exit.
The TV has now tuned in all the available
channels.
Detaching the Table-Top Stand from the TV~
• Do not remove the Table-Top Stand for any reason other
than to wall-mount the TV.
KDL-32S55xx/KDL-32P35xx/KDL-26S55xx
KDL-22S55xx
Back: Start:
Do you want to start Auto Tuning?
Auto Tuning
Do you want to use the Eco Preset?
Choosing "YES" will reduce power consumption.
Power Saving
Idle TV Standby
PC Power Management
Reduce
3 h
On
Yes No
Eco Preset
Table-Top
Stand
Table-Top
Stand