4 Press F/f to select the country/region in which you will operate the TV, then press 
.
Auto Start Up
Language
Country
Location
Back: 
Select:
Confirm:
If the country/region in which you want to use the TV does not appear in the list, select
5 Press F/f to select the location type in which you will operate the TV, then press 
.
Auto Start Up |
|
Language |
|
Country |
|
Location | Home |
| Shop |
Back: 
Select: 
Confirm: 
This option selects the initial picture mode appropiate for the typical lighting condition in these enviroments.
5: Auto-tuning the TV
1 Before you start
The video channel will be located and stored on the TV during
If no VCR is connected to the TV, skip this step.
2 Press 
.
Do you want to start automatic tuning?
Back: | Start: | Cancel: MENU |
|
|
|
The TV starts searching for all available digital channels, followed by all available analogue channels. This may take some time, so do not
press any buttons on the TV or remote while proceeding.
If a message appears for you to confirm the aerial connection
No digital or analogue channels were found. Check all the aerial connections and press 
to start
3 When the Programme Sorting menu appears on the screen, follow the steps of “Programme Sorting” (page 26).
If you do not change the order in which the analogue channels are stored on the TV, go to step 4.
4 Press MENU to exit.
The TV has now tuned in all the available channels.
~
When a digital broadcast channel cannot be received, or when selecting a region in which there are no digital broadcasts in step 4 (page 6), the time must be set after performing step 4.