Watching TV
Watching TV
2 | 2 |
3
3
1 Press 1 on the TV to switch on the TV.
When the TV is in standby mode (the 1 (standby) indicator on the TV (front) is red), press "/1 on the remote to switch on the TV.
2 Press DIGITAL to switch to digital mode or ANALOG to switch to analogue mode.
The channels available vary depending on the mode.
3 Press the number buttons or PROG +/- to select a TV channel.
To select channel numbers 10 and above using the number buttons, enter the second and third digits within two seconds.
To select a digital channel using the Digital Electronic Programme Guide (EPG), see page 13.
In digital mode
An information banner appears briefly. The following icons may be indicated on the banner.
: Interactive service is available (MHEG Digital Text)
: Interactive service (MHEG Digital Text) is currently disabled
: Radio service
: Scrambled/Subscription service
: Multiple audio languages available 
: Subtitles available
: Subtitles available for the hearing impaired
: Recommended minimum age for current programme (from 4 to 18 years)
: Parental Lock
c: Current programme is being recorded
Additional operations
To | Do this |
Turn on the TV | Press %. Press 2 +/- to set the |
from Standby mode | volume level. |
without sound |
|
|
|
Adjust the volume | Press 2 + (increase)/ |
| - (decrease). |
|
|
Access the | Press . To select an analogue |
Programme index | channel, press F/f, then press |
table (in analogue | . |
mode only) |
|
|
|