Viewing pictures from connected equipment

Switch on the connected equipment, then perform one of the following operation.

For equipment connected to the scart sockets using a fully-wired 21-pin scart lead

Start playback on the connected equipment.

The picture from the connected equipment appears on the screen.

For an auto-tuned VCR (page 6)

In analogue mode, press PROG +/-, or the number buttons, to select the video channel.

For other connected equipment

Press / to display the connected equipment list. Press F/f to select the desired input source, then press . (The highlighted item is selected if 2 seconds pass without any operation after pressing F/f.)

When the input source is set to “Skip” in the “AV Preset” menu under the “Set-up” menu (page 26), that input does not appear in the list.

Symbol on the

Description

screen

 

 

 

 

 

 

 

 

AV1/

 

AV1

To see the equipment connected

 

 

 

 

 

to A.

 

 

 

 

 

 

AV2/

 

AV2

To see the equipment connected

 

 

 

 

 

to B.

 

 

 

 

~

 

 

 

 

SmartLink is a direct link between the

 

 

 

 

TV and a VCR/DVD recorder.

 

 

 

 

 

 

AV3

 

To see the equipment connected to

 

 

 

 

 

 

C.

 

 

 

 

 

 

AV4

 

HDMI IN 4*.

 

 

 

 

 

 

To see the equipment connected

 

 

 

 

to D.

 

 

 

 

If the equipment has a DVI socket,

 

 

 

 

connect the DVI socket to the HDMI

 

 

 

 

IN socket through a DVI-HDMI

 

 

 

 

adaptor interface (not supplied), and

 

 

 

 

connect the equipment’s audio out

 

 

 

 

sockets to the audio in HDMI IN

 

 

 

 

sockets.

 

 

 

 

 

 

AV5

 

HDMI IN 5*.

 

 

 

 

 

 

To see the equipment connected to

 

 

 

 

E.

*~

•Be sure to use only an HDMI cable that bears the HDMI logo.

•When HDMI control compatible equipment is connected, communication with the connected equipment is supported. Refer to page 18 to set up this communication.

Symbol on the

Description

 

screen

 

 

 

 

 

 

 

 

 

AV6 or

To see the equipment connected

 

 

 

AV6

to H.

 

 

 

 

z

 

 

 

 

To avoid picture noise, do not connect

 

 

 

the camcorder to the video socket

 

 

 

 

6 and the S video socket

6

 

 

 

at the same time. If you connect mono

 

 

 

equipment, connect to the L socket

 

 

 

 

6.

 

 

 

 

 

 

PC

 

 

To see the equipment connected

 

 

 

 

 

 

to G.

 

 

 

 

z

 

 

 

 

It is recommended to use a PC

 

 

 

 

cable with ferrites.

 

 

 

 

 

 

 

 

 

 

 

To connect

Do this

 

 

 

Headphones I Connect to the i socket to listen to

 

sound from the TV on headphones.

 

 

 

 

Conditional

To use Pay Per View services.

Access Module

For details, refer to the instruction

(CAM) J

manual supplied with your CAM. To

 

use the CAM, remove the rubber cover

 

from the CAM slot. Switch off the TV

 

when inserting your CAM into the

 

CAM slot. When you do not use the

 

CAM, we recommend that you replace

 

the cover on the CAM slot.

 

~

 

 

CAM is not supported in all countries.

 

Please check with your authorized dealer.

 

 

 

 

Hi-Fi audio

Connect to the audio output sockets

equipment F

 

 

to listen to the sound from the TV

 

 

 

on Hi-Fi audio equipment.

Additional operations

To

Do this

 

 

Return to normal TV

Press DIGITAL or ANALOG.

mode

 

 

 

Access the Digital

Press .

Favourites (in digital

For details, see page 15.

mode only)

 

 

 

Change the volume of

Press 2 +/-.

the connected HDMI

 

control compatible

 

audio system

 

 

 

Mute the sound of the

Press %.

connected HDMI

Press again to restore.

control compatible

 

audio system

 

 

 

Equipment Optional Using

17 GB