Sony Viewing pictures from, connected equipment, 18 GB

Viewing pictures from

Symbol on the	Description
screen

connected equipment

Switch on the connected equipment, then perform one of the following operation.

For equipment connected to the scart sockets using a

AV6 or AV6

To see the equipment connected to H.

z

To avoid picture noise, do not connect

the camcorder to the video socket 6

and the S video socket 6 at the same time. If you connect mono equipment, connect to the L socket

6.

fully-wired 21-pin scart lead

Start playback on the connected equipment.

The picture from the connected equipment appears on the screen.

For an auto-tuned VCR (page 7)

In analogue mode, press PROG +/-, or the number buttons, to select the video channel.

For other connected equipment

Press / to display the connected equipment list. Press F/f to select the desired input source, then press . (The highlighted item is selected if 2 seconds pass without any operation after pressing F/f.)

When the input source is set to “Skip” in the “AV Preset” menu under the “Set-up” menu (page 27), that input does not appear in the list.

Symbol on the			Description
screen
	AV1/	AV1	To see the equipment connected to A.
	AV2/	AV2	To see the equipment connected to B.
			~
			SmartLink is a direct link between the
			TV and a VCR/DVD recorder.
	AV3		To see the equipment connected to C.
	AV4		HDMI IN 4*.
			To see the equipment connected to D.
			If the equipment has a DVI socket,
			connect the DVI socket to the HDMI IN
			socket through a DVI-HDMI adaptor
			interface (not supplied), and connect the
			equipment’s audio out sockets to the
			audio in HDMI IN sockets.
	AV5		HDMI IN 5*.
			To see the equipment connected to E.

*~

•Be sure to use only an HDMI cable that bears the HDMI logo.

•When HDMI control compatible equipment is connected, communication with the connected equipment is supported. Refer to page 19 to set up this communication.

PC	To see the equipment connected to G.
	z
	It is recommended to use a PC cable
	with ferrites.

To connect	Do this
Headphones I Connect to the i socket to listen to
	sound from the TV on headphones.
Conditional	To use Pay Per View services.
Access Module	For details, refer to the instruction
(CAM) J	manual supplied with your CAM. To
	use the CAM, remove the rubber cover
	from the CAM slot. Switch off the TV
	when inserting your CAM into the
	CAM slot. When you do not use the
	CAM, we recommend that you replace
	the cover on the CAM slot.
	~
	CAM is not supported in all countries.
	Please check with your authorized dealer.
Hi-Fi audio	Connect to the audio output sockets
equipment F		to listen to the sound from the TV
	on Hi-Fi audio equipment.

Additional operations

To	Do this
Return to normal TV	Press DIGITAL or ANALOG.
mode
Access the Digital	Press .
Favourites (in digital	For details, see page 16.
mode only)
Change the volume of	Press 2 +/-.
the connected HDMI
control compatible
audio system
Mute the sound of the	Press %.
connected HDMI	Press again to restore.
control compatible
audio system

18 GB