37
Using the Menus
Using the Channel SettingsOption Description
Favorites Select favorite channels and external inputs (see page 27).
Signal Type Cable Select if you are receiving cable channels via Cable TV provider.
Antenna Select if you are using an antenna.
Auto Program Automatically sets up the channel list on the TV for all receivable channels.
1Select Auto Progra m.
2Select OK to start Auto Program.
Add Digital
Channels
1Select Add Digital Channels.
2Select OK to add digital channels.
Show/Hide
Channels
Allows you to show or hide channels that appear when you use the CH +/– buttons.
1Press V/v to scroll through the channels until you find the channel you want to
show or hide. Then press to select it.
2Press V/v to determine if the channel will be shown or hidden. Then press to
select it.
Label Channels Allows you to assign labels (such as station call letters) to channel numbers.
1Press V/v to scroll through the channel numbers. Then press to select the
channel number that you want to assign a label.
2Press V/v to scroll through the label characters (A-Z, 0-9, etc.). Press b to move
to the next character. Repeat the previous steps to add up to seven characters to the
label. When finished, press .
Analog Fine
Tune
Allows you to fine-tune the selected analog channel manually if you feel that a slight
tuning adjustment may improve picture quality. Select Auto to adjust to the most
appropriate analog channel.
• You should run Auto Program after changing the Signal Type setting.
• Running Auto Pro gram will clear the Favorites list.
• Channels that you set to be hidden can be accessed by the 0-9 and buttons.
• You can set channels to be hidden that are automatically set in Auto Program.