7
D:\Cmeng's JOB\SONY TV\SY0279_W1 (Rev-1)\4267385121_US\US03STU.fm
KDL-EX523/EX521/EX520
4-267-385-12(1)
Getting Started
Before setting up your TV
Some TV models are packaged with a
detached Table-Top Stand so you can
mount your TV to a wall right away. If you
are not mounting the TV to a wall, you will
need to attach the Table-Top Stand. You
will need a Phillips screwdriver and the
supplied screws to complete the task. Look
for the supplied Table-Top Stand instruction
leaflet.
Be sure to consider the following while
setting up your TV:
• Disconnect all cables when carrying the
TV.
• Carry the TV with the adequate number
of people; larger size TVs require two or
more people.
• Correct hand placement while carrying
the TV is very important for safety and
to avoid damage.
• Ensure your TV has adequate
ventilation, see page 15.
• For best picture quality, do not expose
the screen to direct illumination or
sunlight.
• Avoid installing the TV in a room with
reflective wall and floor materials.
• Avoid moving the TV from a cold area
to a warm area. Sudden room
temperature changes may cause moisture
condensation. This may cause the TV to
show poor picture and/or poor color.
Should this occur, allow moisture to
evaporate completely before powering
the TV on.
• Ensure that there are no objects in front
of the TV.
• Do not expose the Presence Sensor to
direct sunlight or other strong light, as
malfunction may occur.
1: Attaching the Table-Top
Stand
Refer to the supplied Table-Top Stand
instruction leaflet for proper attachment.
1Place the TV unit on the Table-Top
Stand.
~
•Do not put stress on the LCD panel or the
frame around the screen.
•Be careful to not pinch your hands or the AC
power cord when you install the TV unit to the
Table-Top Stand.
BKDL-46/40/32EX52x (except
KDL-40/32EX521 (Mexico models))
Presence Sensor
IR Sensor
Guide
pins
(Continued)