Using Optional Equipment
Connecting optional equipment
You can connect a wide range of optional equipment to your TV. Connecting cables are not supplied.
Connecting to the TV (side)
To connect | Do this |
|
|
Conditional Access | To use Pay Per View services. |
Module (CAM) A For details, refer to the instruction manual supplied with your CAM. To use the CAM, remove the rubber cover from the CAM slot. Switch off the TV when inserting your CAM into the CAM slot. When you do not use the CAM, we recommend that you replace the cover on the CAM slot.
S VHS/Hi8/DVC | Connect to the S video socket |
| ||
camcorder B | 4 or the video socket | 4, | ||
| and the audio sockets | 4. To |
| |
| avoid picture noise, do not connect | |||
| the camcorder to the video socket | |||
| 4 and the S video socket |
| ||
| 4 at the same time. If you |
| ||
| connect mono equipment, connect | |||
| to the L socket | 4, and set |
| |
| “Dual Sound” to “A” (page 18). | |||
|
| |||
Headphones C | Connect to the i socket to listen to | |||
| sound from the TV on headphones. | |||
|
|
|
|
|
Additional operations
To | Do this |
|
|
|
|
| |
Access the Input | Press | to access the Input signal | |
signal index table | index table. (Then, only in | ||
| analogue mode, press g.) To | ||
| select an input source, press F/f, | ||
| then press | . | |
|
|
|
|
S VHS/Hi8/DVC camcorder
Headphones