Problem |
| Cause/Remedy |
|
|
|
| |||
|
|
|
|
|
| ||||
Picture noise when viewing a | • Select “Manual Programme Preset” in the | ||||||||
TV channel |
|
| (Automatic Fine Tuning) to obtain better picture reception (page 21). | ||||||
|
|
|
|
|
| ||||
Some tiny black points and/or | • The picture of a display unit is composed of pixels. Tiny black points and/or | ||||||||
bright points on the screen |
|
| bright points (pixels) on the screen do not indicate a malfunction. | ||||||
|
|
|
|
|
|
| |||
No colour on programmes |
| • Select “Reset” in the “Picture Adjustment” menu to return to the factory | |||||||
|
|
|
|
| settings (page 17). |
|
|
|
|
|
|
|
|
|
|
|
|
| |
No colour or irregular colour |
| • | Check the connection of the Y, PB/CB, PR/CR jacks of |
| 3. | ||||
|
| ||||||||
when viewing a signal from the | • | Make sure that the Y, PB/CB, PR/CR jacks of |
| 3 are firmly seated in their | |||||
| |||||||||
Y, PB/CB, PR/CR jacks of |
|
| 3 |
| respective sockets. |
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
| ||
Irregular picture when viewing | • Check PC input socket connection. |
|
|
|
| ||||
a signal from PC |
| • Connect to PC input socket instead of HDMI IN 6, 7 socket. | |||||||
|
|
|
| • If the connection is only available through HDMI socket, change the screen | |||||
|
|
|
|
| resolution to 720p and adjust horizontal and vertical screen size in the | ||||
|
|
|
|
| display properties settings of PC. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sound
Problem | Cause/Remedy | |
|
| |
No sound, but good picture | • Press 2 +/– or % (Mute). | |
| • | Check that “TV Speakers” is set to “On” in the “Sound Adjustment” menu |
|
| (page 18). |
|
|
|
Noisy sound | • | See the “Picture noise” causes/remedies on page 27. |
|
|
|
Channels
Problem | Cause/Remedy |
|
|
The desired channel cannot be | • Switch between digital and analogue mode and select the desired digital/ |
selected | analogue channel. |
Some channels are blank • Scrambled/Subscription only channel. Subscribe to the Pay Per View service.
•Channel is used only for data (no picture or sound).
•Contact the broadcaster for transmission details.
Digital channel is not displayed • Check that the aerial is plugged directly into the TV (not through other equipment).
•Contact a local installer to find out if digital transmissions are provided in your area.
•Upgrade to a higher gain aerial.
General
ProblemCause/Remedy
The TV turns off automatically (the TV enters standby mode)
•Check if the “Sleep Timer” is activated, or confirm the setting of “Off Time” (page 20).
•If no signal is received and no operation is performed in the TV mode for 10 minutes, the TV automatically switches to standby mode.
The TV turns on automatically | • Check if the “On Time” is activated (page 20). | |
|
|
|
Some input sources cannot be | • | Select “AV Preset” in the |
selected |
| source (page 20). |
|
|
|
The remote does not function | • | Replace the batteries. |
|
|
|