AV2 Output

RGB Center

PC Adjustment

Timer

Sets a signal to be output through the socket labelled / 2 on the rear of the

TV. If you connect a VCR to the / 2 socket, you can then record from the equipment connected to other sockets of the TV.

“TV”: Outputs a broadcast.

“Auto”: Outputs whatever is being viewed on the screen. Not available for

AV3, AV5 and AV6.

Adjusts the horizontal picture position so that the picture is in the middle of the screen.

Tip

This option is only available if an RGB source has been connected to the Scarts connectors

1/ 1 or 2/ 2 on the rear of the TV.

Customizes the TV screen as a PC monitor.

Tip

This option is only available if you are in PC Mode.

“Phase”: Adjust the screen when a part of a displayed text or image is not clear.

“Pitch”: Enlarges or shrinkes the screen size horizontally.

“H Center”: Moves the screen to the left or to the right.

“V Lines”: Corrects the picture lines while viewing an RGB input signal from the

PC connector.

“Power saving”: Turns to standby mode if no PC signal is received.

“Reset”: Resets to the factory settings.

Sets the timer to turn on/off the TV.

Sleep Timer

Sets a period of time after which the TV automatically switches itself into standby

mode.

When the Sleep Timer is activated, the (Timer) indicator on the TV (front) lights up in orange.

Tips

If you switch off the TV and switch it on again, “Sleep Timer” is reset to “Off”.

“Sleep timer will end soon. Power will be turned off” appears on the screen one minute before the TV switches to standby mode.

Clock Set

Allows you to adjust the clock manually. When the TV is receiving digital channels, the clock cannot be adjusted manually since it is set to the time code of the broadcasted signal.

• Timer

Sets the timer to turn on/off the TV. “Timer Mode”: Selects the desired period. “On Time”: Sets the time to turn on the TV. “Off Time”: Sets the time to turn off the TV.

Set-up menu

 

Set Up

 

 

 

 

 

 

 

Auto Start Up

 

 

 

 

 

 

 

Language

English

 

 

 

 

 

 

Country

-

 

Auto Tuning

Programme Sorting

AV Preset

Sound Offset

Manual Programme Preset

Digital Set Up

You can select the options listed below on the Set-up menu. To select options in “Settings”, see “Navigating through menus” (page 15).

Back: Select:

Auto Start-up

Language

18 GB

Enter:

Exit: MENU

Starts the “first time operation menu” to select the language and country/region, and tune in all available digital and analogue channels.

Selects the language in which the menus are displayed.