Using the Menus
Using the PC Settings
PC Settings | Video 8 |
Wide Mode | Normal |
Reset |
|
Auto Adjustment |
|
Phase | 0 |
Pitch | 0 |
Horizontal Center | 0 |
Vertical Center | 0 |
Power Management | Off |
A
Resolution: 1024x 768/60Hz
D
Select: | Set: | Back: RETURN Exit: MENU |
Option | Description |
|
Wide Mode | Normal | Select to display in the original image size. |
|
|
|
| Full1 | Select to enlarge the picture to fill the display area, keeping its original |
|
| aspect ratio. |
|
|
|
| Full2 | Select to enlarge the picture to fill the display area. |
| Wide Mode can also be accessed using the WIDE button on the remote control. |
Reset | Resets the current setting to the default values, except Wide Mode and Power |
| Management. |
|
|
Auto Adjustment | Select to automatically adjust the display position and phase of the picture when the TV |
| receives an input signal from the connected PC. Note that Auto Adjustment may not work |
| well with certain input signals. In such cases, manually adjust the options below. |
|
|
| Auto Adjustment for PC can also be set using the TOOLS button on the remote |
| control. |
Phase | Adjust after Pitch to fine tune overall sharpness. |
|
|
Pitch | Adjust uneven sharpness on screen. |
|
|
| For the PC Input Signal Reference Chart, see page 43. |
|
|
Horizontal Center Allows you to move the position of the picture left and right.
Press B/b and press 
to adjust.
Vertical Center | Allows you to move the position of the picture up and down. | |||
| Press V/v and press |
|
| to adjust. |
|
|
|
|
|
Power Management | On | Select to automatically switch to the standby mode when there is no | ||
|
| signal input for 30 seconds. | ||
|
|
|
|
|
| Off | Select to turn off Power Management. | ||
Power Management is not
36