D:\TV's JOB\SONY TV\SY0422_B6\4411986111_US\US03STU.fm
KDL-55HX850/46HX850
4-411-986-11(1)
11
Getting Started
To detach the Table-Top Stand from the TV,
remove the screws fixed in step 2.
~
•Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
•When removing the Table-Top Stand from
the TV, lay the display face down on a stable
work surface that is larger than the TV.
•To prevent damaging the surface of the LCD
display, make sure to place a soft cloth on
the work surface.
•When installing the TV on a wall, remove the
screws from the rear of the TV. (They are
fastened in the screw holes for wall
mounting.) Be sure to store the removed
screws in a safe place, keeping them away
from children.
��When attaching the Table-Top Stand again,
be sure to fasten the screws (previously
removed) to the original holes on the rear of
the TV.
2: Adjusting the viewing angle of the TV
This TV can be adjusted within the angles as
illustrated.

xAngle adjustment (Swivel)

~
•When adjusting the angle, hold the stand
with one hand to avoid having the stand slip
or TV tip over.

xAngle adjustment (Tilt)

* The angle is approximate value.

Detaching the Table-Top

Stand from the TV

*15°
*15°
*15°
*15°
*6°