Screen menu
You can select the options listed below on the Screen menu. To select options in “Settings”, refer to “Picture menu” (page 20).
Target Inputs
Selects whether to apply settings made in the Screen menu to all inputs, or only to the input currently being watched.
“All”: Applies settings to all inputs.
“Viewing Only”: Applies settings only to the current input.
Screen Format
For details about the screen format, see “To change the screen format manually to suit the broadcast” (page 13).
Auto Format
Automatically changes the screen format according to the broadcast signal. To keep your setting, select “Off”.
Tips
• Even if you have selected “On” or “Off” in “Auto Format”, you can always modify the
format of the screen by pressing repeatedly.
• “Auto Format” is available for PAL and SECAM signals only.
4:3 Default
Selects the default screen format for use with 4:3 broadcasts.
“Smart”: Displays conventional 4:3 broadcasts with an imitation wide screen effect.
“4:3”: Displays conventional 4:3 broadcasts in the correct proportions.
“Off”: Keeps the current “Screen Format” setting when the channel or input is changed.
Tip
This option is available only if “Auto Format” is set to “On”.
Display Area
Adjusts the screen area displaying the picture.
“Full Pixel”: Displays the picture for 1080i or 1080p sources in the original size when parts of the picture are cut off.
“Normal”: Displays the picture in the original size.
Horizontal Shift | Adjusts the horizontal position of the picture. |
|
|
Vertical Shift | Adjusts the vertical position of the picture when the screen format is set to “Smart” |
| (50 Hz), “Zoom” or “14:9”. |
Vertical Size
Adjusts the vertical size of the picture when the screen format is set to “Smart”, “Zoom” or “14:9”.