AV2 Output

Sets a signal to be output through the socket labelled

/

 

 

2 on the rear of the TV.

 

 

 

If you connect a VCR or other recording equipment to the

/

 

 

 

2 socket, you can

 

 

 

 

 

then record from the equipment connected to other sockets of the TV.

 

 

 

 

“TV”: Outputs a broadcast.

 

 

 

 

 

 

 

 

 

 

 

 

“AV1”: Outputs signals from equipment connected to the

/

 

 

1 socket.

 

 

 

 

“AV7”: Outputs signals from equipment connected to the

/

 

7 socket.

 

“Auto”: Outputs whatever is being viewed on the screen (except signals from the

 

 

 

/ 3,

 

 

/ 4, HDMI IN 5, HDMI IN 6, HDMI IN 8 and PC IN

 

 

/

 

 

 

 

 

 

 

sockets).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HDMI Set-up

This is used to set the HDMI control compatible equipment connected to the HDMI

 

sockets. Note that the link setting must also be made on the side of the HDMI control

 

compatible equipment that is connected.

 

 

 

 

 

 

 

 

 

 

 

 

HDMI Control

 

 

 

 

 

 

 

 

 

 

 

 

 

Sets whether or not to link the operations of the HDMI control compatible equipment

 

and the TV. When set to “On”, the following menu items can be performed.

 

Auto Devices Off

 

 

 

 

 

 

 

 

 

 

 

 

When this is set to “On”, any connected HDMI control compatible equipment will

 

be turned off with the TV.

 

 

 

 

 

 

 

 

 

 

 

 

Auto TV On

 

 

 

 

 

 

 

 

 

 

 

 

 

When this is set to “On”, the TV turns on when any connected HDMI control

 

compatible equipment is turned on.

 

 

 

 

 

 

 

 

 

 

 

 

HDMI Device List

 

 

 

 

 

 

 

 

 

 

 

 

Displays the connected HDMI control compatible equipment.

 

 

 

 

 

~

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

You cannot use “HDMI Control” if the TV operations are linked to the operations of an audio

 

system that is compatible with HDMI control.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Auto Start-up

Starts the initial set-up to select the language and country/region, and tune in all

 

available digital and analogue channels.

 

 

 

 

 

 

 

 

 

 

 

 

Usually, you do not need to do this operation because the language and country/

 

region will have been selected and channels already tuned when the TV was first

 

installed (page 6).

 

 

 

 

 

 

 

 

 

 

 

 

However, this option allows you to repeat the process (e.g. to retune the TV after

 

moving house, or to search for new channels that have been launched by

 

broadcasters).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power Saving

Selects the power saving mode to reduce the power consumption of the TV.

 

When “Picture Off” is selected, the picture is switched off and the

 

(Picture Off)

 

indicator on the TV front panel lights up in green. The sound remains unchanged.

 

 

 

 

 

 

 

 

 

 

 

 

 

Light Sensor

“On”: Automatically optimises the picture settings according to the ambient light in

 

the room.

 

 

 

 

 

 

 

 

 

 

 

 

 

“Off”: Turns off the “Light Sensor” feature.

 

 

 

 

 

 

 

 

 

 

 

 

~

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Be sure not to put anything over the sensor, as its function may be affected. See page 14 for

 

further information on the sensor.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PC Power Management

Switches the TV to standby mode if no signal is received for 30 seconds in the PC

 

input.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Language

Selects the language in which the menus are displayed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

38 GB