ItemDescription

1 VIDEO IN 1

S VIDEO

VIDEO IN 2/3 VIDEO/L(MONO)-

AUDIO-R

Connects to the S VIDEO output jack of video equipment. If both composite video and S VIDEO are connected, S VIDEO signal has priority.

Connects to the composite video and audio output jacks on your A/V equipment.

~

•If you have mono equipment, connect its audio output jack to the TV’s L (MONO) audio input jack.

Started Getting

2COMPONENT IN Connects to your equipment’s component video (YPBPR) and audio (L/R) jacks.

1/2 (1080p/1080i/ 720p/480p/480i)/ L-AUDIO-R

3 PC IN

Connects to a personal computer’s video and audio output connector (see page 14). Can

(RGB/AUDIO)

also be connected to other analog RGB equipment. See “PC Input Signal Reference

 

Chart” on page 14 for the signals that can be displayed.

~

•For some Apple Macintosh computers, it may be necessary to use an adapter (not supplied). If this is the case, connect the adapter to the computer before connecting the HD15-HD15 cable.

•If the picture is noisy, flickering or not clear, adjust Phase and Pitch of Screen settings on page 36.

4HDMI IN 1/2/3 HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital audio/video interface between this TV and any HDMI-equipped A/V equipment. HDMI supports enhanced, or high-definition video, plus digital audio.

 

HDMI IN 4

If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the

 

R-AUDIO-L

HDMI IN 4 (with DVI-to-HDMI cable or adapter) jack, and connect the audio jack to the

 

 

AUDIO IN (L/R) jacks of HDMI IN 4.

 

 

~

 

 

• Be sure to use only an HDMI cable that bears the HDMI logo.

 

 

• When connecting a DVI-equipped PC to an HDMI jack, also connect an Audio cable

 

 

between the PC and R-AUDIO-L jack.

 

 

 

5

DMex/

This USB port is for service only unless you are connecting the optional BRAVIA

 

SERVICE

external module (DMex).

6

DIGITAL AUDIO

Connects to the optical audio input of your digital audio equipment that is PCM/Dolby*

 

OUT (OPTICAL)

Digital compatible.

 

 

 

7

AUDIO OUT (VAR/

Connects to the left and right audio input jacks of your analog audio equipment. You can

 

FIX)

use these outputs to listen to your TV’s audio through your stereo system.

 

 

 

8

CABLE/

RF input that connects to your cable or VHF/UHF antenna.

 

ANTENNA

 

 

 

 

9

AC IN

Connects to your power source. Connect the supplied power cord to AC IN and the

 

 

nearest wall outlet.

* Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

11