Sony Channel Settings

Channel Settings

Signal Type	Cable			For receiving cable channels via cable TV provider.
		Antenna		For receiving signal via over-the-air antenna.
	~
		• You should run Auto Program after changing the Signal Type setting.
Auto Program		Automatically sets the channel list in the TV for all receivable channels. Channel scanning
		will be based on the Signal Type (Cable/Antenna) setting.
	1		Select Auto Program.
	2		Select OK to start Auto Program. When Auto Program is completed, the screen
	3		will display the number of channels found.
			Press RETURN to exit Auto Program.

~

•Running Auto Program will clear the Favorites channel list for the current signal type.

•If you run Auto Program again, previously scanned channels will be overwritten with the newly scanned channels.

Add Digital Channels Select to add digital channels. Be sure to have the Signal Type option selected appropriately for the signal source. (Useful for antenna installations.)

Show/Hide Channels Allows you to show or hide channels when you surf with the CH +/– button or in the TV channel list on the XMB™.

1Press V/v to scroll through the channels until you highlight the channel to show or hide.

2Press to select Shown or Hidden.

To show or hide more channels, repeat steps 1-2.

~

•Hidden channels can be accessed by entering the channel number with 0-9buttons on the remote control.

Edit Channel Labels Assigns labels (such as station call letters) to channel numbers.

1Press V/v to scroll through the channel numbers. Then press to select the channel number to assign a label.

2Press V/v to scroll through the label characters (A-Z, 0-9, etc.). Press b to move to the next character. Repeat to add up to 7 characters to the label. Press to set it. To assign labels to more channels, repeat steps 1-2.

~

• This feature is not available when using the TV Guide On Screen system.

Settings TV Using

37