D:\SONY TV\SY120165_H1\4447572111_US\US03STU.fm
KDL-55W900A
4-447-572-11(1)
11
Getting Started
To detach the Table-Top Stand from the TV,
remove the screws fixed in step 2.
~
•Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
•When removing the Table-Top Stand from
the TV, lay the display face down on a stable
work surface that is larger than the TV.
•To prevent damaging the surface of the LCD
display, make sure to place a soft cloth on
the work surface.
•Be sure the TV is vertical before turning on.
To avoid uneven picture uniformity do not
power on the TV with the LCD panel facing
down.
•When installing the TV on a wall, remove the
screws from the rear of the TV. Be sure to
store the removed screws in a safe place,
keeping them away from children.
•When attaching the Table-Top Stand again,
be sure to fasten the screws (previously
removed) to the original holes on the rear of
the TV.
2: Adjusting the viewing angle of the TV
This TV can be adjusted within the angles as
illustrated.

xAngle adjustment (Swivel)

~
•When adjusting the angle, hold the stand
with one hand to avoid having the stand slip
or TV tip over.
* The angle is approximate value.

Detaching the Table-Top

Stand from the TV

×
2
×
2
Soft cloth
*15°
*15°
*15°
*15°