Overview of Remote Control Buttons
2
1
3
4
5
6
7
8
9
q;
1TV I/ 
: To Temporarily Switch Off TV (standby mode):
Press this button to temporarily switch off TV (the standby indicator 
on the TV lights up). Press again to switch on TV from standby mode.
•To save energy we recommend switching off completely when TV is not in use.
•If the “Auto Shutoff” option is set to “On” (see page 25) the TV switches automatically into standby mode after 15 minutes without a TV signal and without any button being pressed.
2VIDEO I/ 
: press this button to switch your VCR or DVD on or off.
3Media Selector: press these buttons to select which device you want to operate, TV, VCR, DVD or AUX. A green light will be momentarily lit to show which one you have selected. For details refer to pages
4Selecting TV mode: press this button to switch off Teletext or Video input mode.
5Selecting input source: press this button repeatedly until the desired input symbol of the source appears on the TV screen. Refer to page 40.
6Switching off the picture: press this button to switch off the picture. Only the picture is switched off; the sound remains on. Press again to cancel.
7Selecting broadcast channels: if Media Selector (3) is switched to TV, press these buttons to select channels. For
8a) Watching last channel selected: if Media Selector (3) is switched to TV, press this button to return to the previous channel you were watching (provided you watched it for at least 5 seconds).
b)Selecting VCR
9a) Fastext: if Media Selector (3) is switched to TV and whilst you are in Teletext mode, these buttons can be used as Fastext buttons. For details see page 36.
b)Operating VCR or DVD: if Media Selector (3) is switched to VCR or DVD, these buttons will operate the main functions of your VCR or DVD, once the remote control has been programmed. Refer to page 41.
q; Teletext: press this button to switch on Teletext. For details see page 36.
continued...
10 Overview & Installation