Troubleshooting
Here are some simple solutions to problems which may affect the picture and sound.
TV
| Problem | Possible solution |
|
| |||||
| No picture |
|
|
|
|
|
|
| |
|
| No picture (screen is dark) and no sound. • | Check the aerial connection. |
|
| ||||
|
|
| • | Connect the TV to the mains, and press the power switch on the | |||||
|
|
|
| right side of the TV set. |
|
| |||
|
|
| • | If the (standby) indicator is on, press AUX/VIDEO |
|
|
| on the | |
|
|
|
|
| |||||
|
|
|
| ||||||
|
|
|
| remote control. |
|
| |||
|
|
|
|
|
|
|
|
|
|
|
| The TV turns off automatically. (The TV | • | Check if the Sleep Timer is activated (page 25). |
|
| |||
|
| enters the standby mode.) | • | Check if Auto Shutoff is activated (page 25). |
|
| |||
|
|
|
|
|
|
|
|
|
|
|
| No picture or no menu information from | • | Check that the optional equipment is on and press the |
|
|
| button | |
|
|
|
| ||||||
|
| equipment connected to the Scart |
| repeatedly on the remote control until the correct input symbol is | |||||
|
| connector. |
| displayed on the screen (page 40). |
|
| |||
|
|
| • Check the connection between the optional equipment and the TV. | ||||||
|
|
|
|
|
|
|
|
| |
| Poor picture/Unstable picture. |
|
|
|
|
|
|
| |
|
| Double images or ghosting. | • | Check aerial/cable connections. |
|
| |||
|
|
| • Check the aerial location and direction. |
|
| ||||
Only snow and noise appears on the screen.
• Check if the aerial is broken or bent. | GB |
•Check if the aerial has reached the end of its serviceable life.
Dotted lines or stripes. | • Keep the TV away from electrical noise sources such as cars, |
| motorcycles, or |
|
|
No colour on colour programmes.
•Using the menu system, select the “Picture Adjustment” menu and select “Reset” to return to the factory settings (page 19).
•If you set the Power Saving function to “Reduce,” picture colours may become dimmer (page 22).
Some tiny black points and/or bright points on the screen.
•The picture of the display is composed of pixels. Tiny black points and/or bright points (pixels) on the screen, do not indicate a malfunction.
The picture is too bright.
•Using the menu system, select the “Picture Adjustment” menu and select “Picture Mode” Then select the desired picture mode (page 18).
•Make sure that the aerial is connected using the supplied coaxial cable.
Picture (stripe) noise. | • Keep the aerial cable away from other connecting cords. | |
| • | Do not use |
|
|
|
Poor picture (white saturation) when | • | Make sure that the output signal of the equipment connected to the |
viewing a signal from Scart connector | Scart connector | 3/ S is not an RGB signal. If it is an RGB | |||
3/ S . | signal, please connect the equipment to Scart | 1/ | or | ||
| 2/ | . |
|
|
|
continued...
Additional Information 45